Picture Hanging System Tensioned Cable Display Suspension Kit Ceiling To Floor

Product Description

Perfect for fixing hanging signage or creative panels.
The U saddle mount provides a fast easy mounting solution for hanging item in a vertical orientation.

Simply slide the panel into place,
Adjust the cable to desired length,
Trim excess cable away and your display is complete!
The cable gripper has an inbuilt clutch fitting which allows for infinite adjustment of the cable length. Providing an easy solution for making adjustments.

1. Panel Clamps

Panel Clamps that hang Acrylic, Glass, Foam Board, Corex Board, and MDF Sheets up to 8mm thickness!
CUSTOM COLORS AVAILABLE!

Panel Clamps are designed to display Signs & Banners, from the ceiling; but can also hang

any type of Panel or Mount board, up to 8MM thickness!

Attaches to any 3MM thick cable.

MORE INFO

These Panel Supports are designed primarily for Easy Access Acrylic Pockets, but can also

hold any Panel or Mount board up to 4MM thickness!

Attaches to any 3MM thick cable. Suitable for any Pocket size, up to A0 sizes!

2.ceiling-mounted-cable

MORE INFO

Straight forward and easy to install, with direct screw fixing to the ceiling; this is the

simplest way to display using a suspended cable! Ideal for signage and banners!

Installation

Unscrew the Ceiling Fitting into 2 pieces (1 'Brass Mount', and 1 'Chrome Cap with

Cable'). Install the 'Brass Mount' to the ceiling. Now screw the polished 'Chrome Cap with

Cable' back onto the Brass Mount. Cable can be cut to length afterwards.

Note: Fittings can also be supplied with "Transparent" Perlon Cord! (On request)

3.'Shelf' Cable Support, Single &'Shelf' Cable Support, Double

MORE INFO

Premium quality 'wire clamps' that attach to glass shelving, to create an adjustable Glass

Shelf Display; that's suspended using our Cable Display Fittings! 'Double' supports are

required when you have 2 or more columns of shelving; and clamp between 2 shelves, on a

single cable! Once your cable system is installed, Glass Shelves can be added / removed,

adjusted in no time at all; without the need of dismantling your system!

Attaches to any 2MM thick cable. 2 shelves 'side-by-side' would require 2 double supports,

front & rear!

Instructions:

Fixed at the track end, with various hooks and wire ropes, it can be used to hang items and move in a suitable position.

An essential power track part for attaching track lighting to drop ceilings. Note: you can drill in the track to match locations when using this part. You do not have to necessarily use the existing holes but can put holes where needed. Do NOT use this part if you are using our suspension system, it has it own special clips and parts.

Product application introduction:

Copper Art Cable Hanging System is perfect for residential and commercial applications that include:

Home shelving
Window display shelving
office shelving
conference rooms shelving

Our advantage:

Weimei specializes in suspension application design, and the company's products are designed to reduce installation costs and increase flexibility.

The company has advanced production equipment, high-precision CNC automatic lathes to meet the high-volume production needs of customers.

The materials used in all products are in line with EU ROHS standards. The products are subjected to strict salt spray test and tensile test at the factory to ensure the quality and safety of the products.

Custom description:

The company can provide samples for customers free of charge (need to pay for postage). Different sizes, colors and other specifications can be customized according to requirements. The products can be designed with customer-specific icons or logos.

Quality Policy

All merchandise is produced to standard and commercial tolerances. WIRE ROPE MATE warranties products to be free from defects in workmanship and material. When WIRPE ROPE MATE Display has determined that a product is defective, it will be replaced. WIRE ROPE MATE liability is limited to the cost of the defective product.

No other warranty is expressed or implied.

Sample Policy

WIRE ROPE MATE HARDWARE will provide samples for your testing

and inspection. Most samples are supplied at a 20% discounted cost (plus DHL Charges).

If you need to order components for a prototype or fabrication of a prototype, please contact us for a quotation.

FAQs:

Q: What is your trading and payment terms?

A:

1. Payment term: T/T 30% deposit after order confirmed, 70% balance before shipment or paypal for small amount .

2. Lead time : normally 15-25days after deposit received.

3. Sample policy : Samples are always available for each model . Samples can be ready in 3-10 days once payment received .

4. Shipping port: Shenzhen/Guangzhou China

5. Discounts : We offer discount for big quantity.

Q: How I can delivery the my goods?

A:

1, By Express: such as DHL, UPS, TNT, FEDEX etc. The dispatch time is about 3-5 days

2, Sea Freight: we will update sea freight once we know your sea port where goods will be delivered.

3, Agent designated by client: please tell us the contact detail of your shipping agent and we will arrange to deliver the items.

Q: How to place an order?

A:

We produce according to customers’ specifications,so you’d better give us complete information as specified below:

Material,Diameter,Construction,Coating,Length,Packing,Quantity, Remarks

Q: Are your products of good quality? How can I trust you?

A:

Yes. We are a professional manufacturer of wire assemblies with 10 years producing experience in China.We have always been cooperating with domestic and overseas customers and partners with the first- class quality and service to make great achievements. If this is your first time to contact us, please trust us, we’ll not let you down.

Q: What’s the lead time of my order?

A:

It was largely depend on the size of your order .normally ,15days . if you are in urgent need of it ,we will try my best to met your requirement.

If you have any questions else ,please feel free to contact us.

Susan

Dongguan Wire Rope Mate Hardware Co., Limited

Add: No.28,Rong Ji Road, Shang Sha Community, Chang An Town, Dongguan City, Guangdong, China.

Post Code:523867

Mobile: +86 18926802440

WeChat: 18874061218

Skype: susanyang8912

WhatsApp:+86 188 7406 1218

Tel: +86 0769-8532 2312 EXT:8008

Fax: +86 0769-8549 3351

E-mail: susan@wireropemate.com

Website: http://www.cablesuspensionkit.com